Nuclear power is the use of nuclear reactions to produce electricity. Nuclear power can be obtained from nuclear fission, nuclear decay and nuclear fusion reactions. Presently, the vast majority of electricity from nuclear power is produced by nuclear fission of uranium and plutonium in nuclear power plants. Nuclear decay processes are used in niche applications such as radioisotope thermoelectric generators in some space probes such as Voyager 2. Reactors producing controlled fusion power have been operated since 1958 but have yet to generate net power and are not expected to be commercially available in the near future.
The first nuclear power plant was built in the 1950s. The global installed nuclear capacity grew to 100 GW in the late 1970s, and then expanded during the 1980s, reaching 300 GW by 1990. The 1979 Three Mile Island accident in the United States and the 1986 Chernobyl disaster in the Soviet Union resulted in increased regulation and public opposition to nuclear power plants. Nuclear power plants supplied 2,602 terawatt hours (TWh) of electricity in 2023, equivalent to about 9% of global electricity generation, and were the second largest low-carbon power source after hydroelectricity. As of November 2025, there are 416 civilian fission reactors in the world, with overall capacity of 376 GW, 63 under construction and 87 planned, with a combined capacity of 66 GW and 84 GW, respectively. The United States has the largest fleet of nuclear reactors, generating almost 800 TWh per year with an average capacity factor of 92%. The average global capacity factor is 89%. Most new reactors under construction are generation III reactors in Asia.
Nuclear power is a safe and sustainable energy source that reduces carbon emissions. Nuclear power generation results in one of the lowest levels of fatalities per unit of energy generated compared to other energy sources. One study estimated that each nuclear plant built could have saved 800,000 life years due to averted air pollution from fossil fueled power plants. Coal, petroleum, natural gas and hydroelectricity have each caused more fatalities per unit of energy due to air pollution and accidents. Nuclear power plants also emit no greenhouse gases and result in less life-cycle carbon emissions than common sources of renewable energy. The radiological hazards associated with nuclear power are the primary motivations of the anti-nuclear movement, which contends that nuclear power poses threats to people and the environment, citing the potential for accidents like the Fukushima nuclear disaster in Japan on March 11, 2011, and is too expensive to deploy when compared to alternative sustainable energy sources.
History
Origins
The process of nuclear fission was discovered in 1938 after over four decades of work on the science of radioactivity and the elaboration of new nuclear physics that described the components of atoms. Soon after the discovery of the fission process, it was realized that neutrons released by a fissioning nucleus could, under the right conditions, induce fissions in nearby nuclei, thus initiating a self-sustaining chain reaction. Once this was experimentally confirmed in 1939, scientists in many countries petitioned their governments for support for nuclear fission research, just on the cusp of World War II, in order to develop a nuclear weapon.
In the United States, these research efforts led to the creation of the first human-made nuclear reactor, the Chicago Pile-1 under the Stagg Field stadium at the University of Chicago, which achieved criticality on December 2, 1942. The reactor's development was part of the Manhattan Project, the Allied effort to create atomic bombs during World War II. It led to the building of larger single-purpose production reactors for the production of weapons-grade plutonium for use in the first nuclear weapons. The United States tested the first nuclear weapon in July 1945, the Trinity test, and the atomic bombings of Hiroshima and Nagasaki happened one month later.
Despite the military nature of the first nuclear devices, there was strong optimism in the 1940s and 1950s that nuclear power could provide cheap and endless energy. Electricity was generated for the first time by a nuclear reactor on December 20, 1951, at the EBR-I experimental station near Arco, Idaho, which initially produced about 100 kW. In 1953, American President Dwight Eisenhower gave his "Atoms for Peace" speech at the United Nations, emphasizing the need to develop "peaceful" uses of nuclear power quickly. This was followed by the Atomic Energy Act of 1954 which allowed rapid declassification of U.S. reactor technology and encouraged development by the private sector.
First power generation
The first organization to develop practical nuclear power was the U.S. Navy, with the S1W reactor for the purpose of propelling submarines and aircraft carriers. The first nuclear-powered submarine, USS Nautilus, was put to sea in January 1954. The S1W reactor was a pressurized water reactor. This design was chosen because it was simpler, more compact, and easier to operate compared to alternative designs, thus more suitable to be used in submarines. This decision would result in the PWR being the reactor of choice also for power generation, thus having a lasting impact on the civilian electricity market in the years to come.
On June 27, 1954, the Obninsk Nuclear Power Plant in the USSR became the world's first nuclear power plant to generate electricity for a power grid, producing around 5 megawatts of electric power. The world's first commercial nuclear power station, Calder Hall at Windscale, England was connected to the national power grid on 27 August 1956. In common with a number of other generation I reactors, the plant had the dual purpose of producing electricity and plutonium-239, the latter for the nascent nuclear weapons program in Britain.
Expansion and first opposition
The total global installed nuclear capacity initially rose relatively quickly, rising from less than 1 gigawatt (GW) in 1960 to 100 GW in the late 1970s. During the 1970s and 1980s rising economic costs (related to extended construction times largely due to regulatory changes and pressure-group litigation) and falling fossil fuel prices made nuclear power plants then under construction less attractive. In the 1980s in the U.S. and 1990s in Europe electricity liberalization made investment in new nuclear power plants (which have high initial capital costs but low operating costs) less desirable than natural gas plants (which had little political opposition, were faster to build, and had low fuel prices).
The 1973 oil crisis had a significant effect on countries, such as France and Japan, which had relied more heavily on oil for electric generation to invest in nuclear power. France would construct 25 nuclear power plants over the next 15 years, and as of 2019, 71% of French electricity was generated by nuclear power, the highest percentage for any nation in the world.
Some local opposition to nuclear power emerged in the United States in the early 1960s. In the late 1960s, some members of the scientific community began to express pointed concerns. These anti-nuclear concerns related to nuclear accidents, nuclear proliferation, nuclear terrorism and radioactive waste disposal. In the early 1970s, there were large protests about a proposed nuclear power plant in Wyhl, Germany. The project was cancelled in 1975. The anti-nuclear success at Wyhl inspired opposition to nuclear power in other parts of Europe and North America.
By the mid-1970s anti-nuclear activism gained a wider appeal and influence, and nuclear power started to become an issue of major public protest. In some countries, the nuclear power debate "reached an intensity unprecedented in the history of technology controversies". The increased public hostility to nuclear power led to a longer license procurement process, more regulations and increased requirements for safety equipment, which made new construction much more expensive. In the United States, over 120 reactor proposals were ultimately cancelled and the construction of new reactors ground to a halt. The 1979 accident at Three Mile Island played a major part in the reduction in the number of new plant constructions in many countries.
Chernobyl and renaissance
During the 1980s one new nuclear reactor started up every 17 days on average. By the end of the decade, global installed nuclear capacity reached 300 GW. Since the late 1980s, new capacity additions slowed significantly, with the installed nuclear capacity reaching 365 GW in 2005.
The 1986 Chernobyl disaster in the USSR, involving an RBMK reactor, altered the development of nuclear power and led to a greater focus on meeting international safety and regulatory standards. It is considered the worst nuclear disaster in history both in total casualties, with 56 direct deaths, and financially, with the cleanup and the cost estimated at 18 billion Rbls (US$68 billion in 2019, adjusted for inflation). The international organization to promote safety awareness and the professional development of operators in nuclear facilities, the World Association of Nuclear Operators (WANO), was created as a direct outcome of the 1986 Chernobyl accident. The Chernobyl disaster played a major part in the reduction in the number of new plant constructions in the following years. Influenced by these events, Italy voted against nuclear power in a 1987 referendum, becoming the first major economy to completely phase out nuclear power in 1990.
In the early 2000s, nuclear energy was expecting a nuclear renaissance, an increase in the construction of new reactors, due to concerns about carbon dioxide emissions. During this period, newer generation III reactors, such as the EPR began construction.
Fukushima accident
Prospects of a nuclear renaissance were delayed by another nuclear accident. The 2011 Fukushima Daiichi nuclear accident was caused by the Tōhoku earthquake and tsunami, one of the largest earthquakes ever recorded. The Fukushima Daiichi Nuclear Power Plant suffered three core meltdowns due to failure of the emergency cooling system for lack of electricity supply. This resulted in the most serious civilian nuclear accident since the 1986 Chernobyl disaster.
The accident prompted a re-examination of nuclear safety and nuclear energy policy in many countries. Germany approved plans to close all its reactors by 2022, and many other countries reviewed their nuclear power programs.
Following the disaster, Japan shut down all of its nuclear power reactors, some of them permanently, and in 2015 began a gradual process to restart the remaining 40 reactors, following safety checks and based on revised criteria for operations and public approval.
In 2022, the Japanese government, under the leadership of Prime Minister Fumio Kishida, declared that 10 more nuclear power plants were to be reopened since the 2011 disaster. Kishida is also pushing for research and construction of new safer nuclear plants to safeguard Japanese consumers from the fluctuating price of the fossil fuel market and reduce Japan's greenhouse gas emissions. Kishida intends to have Japan become a significant exporter of nuclear energy and technology to developing countries around the world.
Current prospects
By 2015, the IAEA's outlook for nuclear energy had become more promising, recognizing the importance of low-carbon generation for mitigating climate change. As of 2015, the global trend was for new nuclear power stations coming online to be balanced by the number of old plants being retired. In 2016, the U.S. Energy Information Administration projected for its "base case" that world nuclear power generation would increase from 2,344 terawatt hours (TWh) in 2012 to 4,500 TWh in 2040. Most of the predicted increase was expected to be in Asia. As of 2018, there were over 150 nuclear reactors planned including 50 under construction. In January 2019, China had 45 reactors in operation, 13 under construction, and planned to build 43 more, which would make it the world's largest generator of nuclear electricity. As of 2021, 17 reactors were reported to be under construction. Its share of electricity from nuclear power was 5% in 2019.
In October 2021, the Japanese cabinet approved the new Plan for Electricity Generation to 2030 prepared by the Agency for Natural Resources and Energy (ANRE) and an advisory committee, following public consultation. The nuclear target for 2030 requires the restart of another ten reactors. Prime Minister Fumio Kishida in July 2022 announced that the country should consider building advanced reactors and extending operating licences beyond 60 years.
As of 2022, with world oil and gas prices on the rise, while Germany is restarting its coal plants to deal with loss of Russian gas that it needs to supplement its Energiewende, many other countries have announced ambitious plans to reinvigorate ageing nuclear generating capacity with new investments. French President Emmanuel Macron announced his intention to build six new reactors in coming decades, placing nuclear at the heart of France's drive for carbon neutrality by 2050. Meanwhile, in the United States, the Department of Energy, in collaboration with commercial entities, TerraPower and X-energy, is planning on building two different advanced nuclear reactors by 2027, with further plans for nuclear implementation in its long term green energy and energy security goals.
During the 2020s, nuclear industry interest in small modular reactors (SMR) has grown enormously, on the expectation that smaller reactors will permit faster deployment with lower financing costs during the build, and lower cost from higher-volume factory manufacturing of the smaller major components, more than compensating for the economies of scale of traditional large reactors. In 2026, Natixis Corporate and Investment Banking reported that the SMR sector was still far from commercial reality and was entering a phase where engineering ambition must confront regulatory complexity, financing realities and industrial execution.
Power plants
Nuclear power plants are thermal power stations that generate electricity by using the thermal energy released from nuclear fission. A fission nuclear power plant is generally composed of: a nuclear reactor, in which the nuclear reactions generating heat take place; a cooling system, which removes the heat from inside the reactor; a steam turbine, which converts the heat into mechanical energy; an electric generator, which converts the mechanical energy into electrical energy.
When a neutron hits the nucleus of a uranium-235 or plutonium atom, it can split the nucleus into two smaller nuclei, which is a nuclear fission reaction. The reaction releases energy and neutrons. The released neutrons can hit other uranium or plutonium nuclei, causing new fission reactions, which release more energy and more neutrons. This is called a chain reaction. In most commercial reactors, the reaction rate is contained by control rods that absorb excess neutrons. The controllability of nuclear reactors depends on the fact that a small fraction of neutrons resulting from fission are delayed. The time delay between the fission and the release of the neutrons slows changes in reaction rates and gives time for moving the control rods to adjust the reaction rate.
Fuel cycle
The nuclear fuel cycle starts with uranium mining. The uranium ore is then converted into a compact ore concentrate, known as yellowcake (U3O8), to facilitate transport. Fission reactors generally need uranium-235, a fissile isotope of uranium. The concentration of uranium-235 in natural uranium is low (about 0.7%). Some reactors can use this natural uranium as fuel, depending on their neutron economy. These reactors generally have graphite or heavy water moderators. For light water reactors, the most common type of reactor, this concentration is too low, and it must be increased by a process called uranium enrichment. In civilian light water reactors, uranium is typically enriched to 3.5–5% uranium-235. The uranium is then generally converted into uranium oxide (UO2), a ceramic, that is then compressively sintered into fuel pellets, a stack of which forms fuel rods of the proper composition and geometry for the particular reactor.
After some time in the reactor, the fuel have reduced fissile material and increased fission products, until its use becomes impractical. At this point, the spent fuel will be moved to a spent fuel pool which provides cooling for the thermal heat and shielding for ionizing radiation. After several months or years, the spent fuel is radioactively and thermally cool enough to be moved to dry storage casks or reprocessed.
Uranium resources
Uranium is a fairly common element in the Earth's crust: it is approximately as common as tin or germanium, and is about 40 times more common than silver. Uranium is present in trace concentrations in most rocks, dirt, and ocean water, but is generally economically extracted only where it is present in relatively high concentrations. As of 2011 the world's known resources of uranium, economically recoverable at the arbitrary price ceiling of US$130/kg, were enough to last for between 70 and 100 years in current reactors.
Light water reactors (which account for almost all operational reactors) make relatively inefficient use of nuclear fuel, mostly using only the very rare uranium-235 isotope.
Limited uranium-235 supply may inhibit substantial expansion with the current nuclear technology.
Nuclear reprocessing can make this waste reusable, and newer reactors also achieve a more efficient use of the available resources than older ones.
More advanced nuclear reactor technologies, such as fast reactors, can use much more of the natural uranium, use current nuclear waste as fuel, as well as creating new fuel out of non-fissile material (see breeder reactor).
With a pure fast reactor fuel cycle with a burn up of all the uranium and actinides (which presently make up the most hazardous substances in nuclear waste), there is an estimated 160,000 years worth of uranium in total conventional resources and phosphate ore at the price of 60–100 US$/kg.
These advanced fuel cycles and nuclear reprocessing are currently not widely used because the price of uranium is very low compared to the cost of nuclear plants, so it's more economically viable to mine new uranium rather than reprocess it.
Nuclear reprocessing also carries higher risk of nuclear proliferation, as it separates material that can be used to manufacture nuclear weapons.
Unconventional uranium resources also exist. Uranium is naturally present in seawater at a concentration of about 3 micrograms per liter, with 4.4 billion tons of uranium considered present in seawater at any time. In 2014 it was suggested that it would be economically competitive to produce nuclear fuel from seawater if the process was implemented at large scale. Over geological timescales, uranium extracted on an industrial scale from seawater would be replenished by both river erosion of rocks and the natural process of uranium dissolved from the surface area of the ocean floor, both of which maintain the solubility equilibria of seawater concentration at a stable level. Some commentators have argued that this strengthens the case for nuclear power to be considered a renewable energy.
Waste
The normal operation of nuclear power plants and facilities produce radioactive waste, or nuclear waste. This type of waste is also produced during plant decommissioning. There are two broad categories of nuclear waste: low-level waste and high-level waste. The first has low radioactivity and includes contaminated items such as clothing, which poses limited threat. High-level waste is mainly the spent fuel from nuclear reactors, which is very radioactive and must be cooled and then safely disposed of or reprocessed.
High-level waste
The most important waste stream from nuclear power reactors is spent nuclear fuel, which is considered high-level waste (HLW). For light water reactors (LWRs), spent fuel is typically composed of 95% uranium, 4% fission products, and about 1% transuranic actinides (mostly plutonium, neptunium and americium). The fission products are responsible for the bulk of the short-term radioactivity, whereas the plutonium and other transuranics are responsible for the bulk of the long-term radioactivity.
High-level waste must be stored isolated from the biosphere with sufficient shielding so as to limit radiation exposure. After being removed from the reactors, used fuel bundles are stored for six to ten years in spent fuel pools, which provide cooling and shielding against radiation. After that, the fuel is cool enough that it can be safely transferred to dry cask storage.
The radioactivity decreases exponentially with time, such that it will have decreased by 99.5% after 100 years.
The more intensely radioactive short-lived fission products (SLFPs) decay into stable elements in approximately 300 years, and after about 100,000 years, the spent fuel becomes less radioactive than natural uranium ore.
Commonly suggested methods to isolate long-lived fission product (LLFP) waste from the biosphere include separation and transmutation, synroc treatments, or deep geological storage.
Thermal-neutron reactors, which presently constitute the majority of the world fleet, cannot burn up the reactor grade plutonium that is generated during the reactor operation. This limits the life of nuclear fuel to a few years. In some countries, such as the United States, spent fuel is classified in its entirety as a nuclear waste. In other countries, such as France, it is largely reprocessed to produce a partially recycled fuel, known as mixed oxide fuel or MOX.
For spent fuel that does not undergo reprocessing, the most concerning isotopes are the medium-lived transuranic elements, which are led by reactor-grade plutonium (with a half-life 24,000 years).
Some proposed reactor designs, such as the integral fast reactor and molten salt reactors, can use as fuel the plutonium and other actinides in spent fuel from light water reactors, thanks to their fast fission spectrum. This offers a potentially more attractive alternative to deep geological disposal.
The thorium fuel cycle results in similar fission products, though creates a much smaller proportion of transuranic elements from neutron capture events within a reactor. Spent thorium fuel, although more difficult to handle than spent uranium fuel, may present somewhat lower proliferation risks.
Low-level waste
The nuclear industry also produces a large volume of low-level waste, with low radioactivity, in the form of contaminated items like clothing, hand tools, water purifier resins, and (upon decommissioning) the materials of which the reactor itself is built. Low-level waste can be stored on-site until radiation levels are low enough to be disposed of as ordinary waste, or it can be sent to a low-level waste disposal site.